Profoto Pro-B2 1200 Generator incl. Multi-voltage Charger and Sync Cable
The Pro-B2 1200 battery generator features an 8 f-stop range, a 250 W modeling light, and recycling in 0.04–1.8 s.
Using the snap-on Universal Power Adapter, the Pro-B2 can actually operate as a regular flash generator while the battery is being recharged. The adapter is fast, charging an empty battery in just 2.5 hours, and it accepts a wide range of input power: 12–24 V or 90–240 V. Included with every Pro-B2 is a standard 110/230 V charger, recharging the battery in 5 hours.
Needless to say, the battery is replaceable. In other words, you just bring as much energy as needed. Also, because the Pro-B2 battery is completely memory free, there is no penalty for partial charging.
Key Features
- up to 200 full power flashes from a single battery cassette
- ultrafast recycling: 0.04–1.8 s
- very short flash durations: 1/2200–1/7400 s
- full 8 f-stop range in 1/2 or 1/10 step adjustments
- asymmetrical or symmetrical power distribution
- up to 250 W modeling lamp
- continuous modeling light or timer
Fine-grained Energy Control
The output power can be adjusted over a full eight f-stop range, from 9 Ws up to 1200 Ws, in increments of 1/10 or 1/2 f-stop, for really precise control. The two outlets allow the power to be split symmetrically or asymmetrically with a 2:1 ratio. Of course the unit provides consistent output flash after flash, hour after hour.
The Pro-B2 features sturdy knobs, rubber-clad grips and frames, as well as the outlets and switches conveniently placed on top. Also, the generator is equipped with the Profoto special non-arching safety connectors, for easy connecting/disconnecting of the head at any time.
Fully Integrated With the Pro-7 System
The Pro-B2 accepts all Pro-7 heads, including the ProHead, ProRing and ProTwin head. Designed exclusively for the Pro-B2, there is also the smaller Pro-B head: light and portable, but still equipped with a strong 100 W modeling lamp.