Shape WLB RED MAMOUTH I
RM SHOULDER RIG
The RM shoulder rig is the core of the RED MAMMOUTH I, RED MAMMOUTH II and RED MAMMOUTH II PRO camera supports.
You can easily adjust the RM shoulder rig to fit your needs and body type. Most of the adjustments are made using knobs, no tools are required. By using the knobs, you can:
- Position the camera
A standard 1/4-20 camera screw and a standard 3/8-20 camera screw knob are used to attached the camera. The knobs are accessible through a 6" (15.2 cm) slot. The camera can thus be positioned nearer or further from you. You can easily remove the 3/8-20 camera screw knob if your camera only requires a 1/4-20 camera screw. Equally, the 1/4-20 camera screw knob can be removed if your camera only requires a 3/8-20 camera screw.
- Position the BACK PAD or the COUNTER WEIGHT
The BACK PAD or the COUNTER WEIGHT can be positioned to fit your body type. The BACK PAD or the COUNTER WEIGHT can be removed when not needed.
- Position the TELESCOPIC SUPPORT ARM
The TELESCOPIC SUPPORT ARM can be positioned to fit your body type. It can be removed when not needed.
The RM shoulder rig also offers the following features:
- Position the 15MM ROD SYSTEM
The rod support system can be removed using a 4mm hexagonal key.
- Position the SHAPE BOX
Using a standard flathead screwdriver, the SHAPE BOX can be attached to the BACK PAD or above the camera platform.
- The shoulder rig can be used on both your left or right shoulder. When wearing the camera support, the camera platform is positioned 3/4" (1.9 cm) above your shoulder tip. Thus the base of your camera is positioned 3/4" (1.9 cm) above your shoulder tip.
- This camera support is made of lightweight aluminum for strength and durability. It is powder coat painted with a professional looking wrinkle finish. The shoulder pad is cushioned for superior comfort.
Note that the handle is not interchangeable on the RM shoulder rig.
HAND4 DOUBLE C HANDLE
The DOUBLE C HANDLE is composed of two handles. Each handle can rotate individually on 360 degrees (vertically). Simply push and hold the button located at the articulation. Once the button is released, the handle stays in place. The same thing can be achieved by pulling and releasing the handle.
The DOUBLE C HANDLE is attached to camera platform with two screws knob. Note that the DOUBLE C HANDLE is not interchangeable on the RM shoulder rig.
The handles core is made of heavy duty technopolymer. The handles grip is made of non-slip rubber. The arms are made of 1/8" lightweight aluminum professionally covered with black powder coat paint.
PAD1 BACK PAD
The BACK PAD is padded on one side. It weights 0.35 lb (0.160 kg). The BACK PAD adds stability and comfort to the shoulder rig.
The BACK PAD is attached to the shoulder rig with a screw knob. The BACK PAD can easily be positioned to fit your body type: up and down by 1-1/4" (3 cm) and left and right on 360 degrees. When not needed, you can easily remove the BACK PAD from the shoulder rig.
The BACK PAD also have a 1/4-20 threaded hole that can be used to attach a SHAPE BOX or any other accessory.
Key Features
- The camera platform is positioned 3/4" (1.9 cm) higher than your shoulder tip.
- Sturdy design for heavy cameras (up to 50 lbs / 22.7 kg) like the RED ONE.
- Wide camera platform (3" / 7.6 cm).
- Heavy duty camera platform made of 3/16" thick aluminum instead of 1/8" thick aluminum.
