This item is unavailable
This page is here for your reference.
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.
The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
- Super Cardioid.
- Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave.
- Maximum SPL: 131dB
- Broadcast sound quality
- Rugged metal contruction.
- Condenser microphone transducer.
- Weighing 161 grams approx. (5.17 oz).
- Low noise circuitry.
- Low handling noise.
- Supplied with stand mount and zip pouch.
Rode Microphones Heavy Duty Windscreen "Dead Cat" VideoMic/NTG-2
Heavy duty "fur ball" type windscreen for high wind situations. Fits SVM (stereo Videomic)
Rode Microphones Boom Pole 10' Aluminum Ultra Lightweight
Machined from high grade aluminium, the boom pole is designed for applications where a 3m extension pole for shotgun microphones is required.
Attaches to the SM3 Shock Mount, RM5 Stand Mount (NT5, NTG-1 & -NTG-2) and VideoMic via its 3/8” thread or any standard 3/8” threaded fitting. ( Length: 0.84 m ~ 3 m or 33” ~ 10’)
Extends up to 3m/10 ft long
Fits all microphones with a standard mic holder
Rode Microphones SM4 Boom Pole Shock Mount NTG1/NTG2
A shotgun microphone suspension shock mount with a stand mount adaptor.
The SM4 shock mount is designed to significantly reduce vibration transmission to shotgun microphones.
Features a 4-way rubber suspension with friction tilt mechanism to aid directional positioning.
A three way mounting system with 1/4” x 20 and 3/8” x 16 internal threads, a 5/8” x 27 and a 3/8” to 5/8” thread adaptor for Tripod, Boom Pole and mic stand mounting.
Also, the perfect accessory for NT3, NT4 and NT5.
- NTG-2 Microphone
- ZP2 (zip pouch)
- RM5 (stand mount)
- WSVM (windshield)
- Heavy Duty Windscreen "Dead Cat"
- Boom Pole 10' Aluminum Ultra Lightweight
- SM4 Boom Pole Shock Mount NTG1/NTG2
The NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery. The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
|Operation output impedance||
The NTG-2 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-2¡¯s output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
|Acoustic principle||Line plus Gradient|
|Frequency range||20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave|
|Output impedance||250 Ù - phantom power, 350 Ù - battery power|
|Signal noise ratio din iec 651||76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)|
|Equvalent noise||18 dB SPL (per IEC651, IEC268-15)|
|Maximum spl||131 dB (@ 1% THD into 1 kÙ)|
|Sensitivity||-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)|
|Dynamic range din iec 651||113 dB (per IEC651, IEC268-15)|
|Power supply voltage||1.5 V Alkaline Battery or P48 Phantom|
|Current consumption||2.0 mA|
|Battery life||>400 hours with fresh alkaline battery|
|Output connection||3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)|
|Weight with battery||161 g approx. (5 oz.)|
|Dimensions width||278 mm|
Questions & Answers
Rode Microphones Boom Pole w/ SM4 Boom Pole, Shock Mount and Dead Cat & NTG-2 Microphone
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.