• Webcode: 406620 • Mfr: ICON2V
Product Highlights
  • Paralink & Teradek Compatibility
  • V-Mount Battery Bracket
  • 1/4"-20 Thread
Web Availability: Special Order
Vistek Locations
  • Toronto Special Order
  • Ottawa Special Order
  • Mississauga Special Order
  • Calgary Special Order
  • Edmonton Special Order
Please call and verify availability at the store as stock changes daily.

Overview

Wireless Director's Kit

With Handles & V-Mount Battery Plate

New ICON wireless series - No more cables

SHAPE ICON director's kit is based on a universal bracket system that will secure the position of your monitor with a 1/4-20 captive screw. The monitor support allows the possibility to install a PARALINK or TERADEK wireless data receiver and a V-MOUNT battery plate. This product offers a perfect handheld solution for directors to carry around.The monitor can also be installed on a gobo stand to keep your setup in the same place.The monitor position can be rotated forward and backward using a red ratchet key to secure the position. Behind the monitor, there's a universal cheeseplate with 1/4-20 and 3/8-16 threaded holes. The cheeseplate can move forwrd and backward with the red knob screw to provide an easy access to the battery rear connectors of the monitor. This bundle includes a pair of handle with our patent push button technology allowing 360 degrees rotation. With this technology, the handle can be easily place up or down with a simple press of your thumb, and you can positionned it backwards so the monitor can easily hold on a flat surface. The handles are attached to the monitor support with SHAPE standard ARRI rosette place on each side of the monitor support.

Key Features:

  • Based on a tension system to move the monitor bracket and the cheese plate forward or rearward to adjust the monitor position 
  • Red ratchet key to secure the lock of the bracket and the cheese plate position 
  • Two 1/4-20 captive screw to secure the monitor position on the angle bracket
  • Included a V-MOUNT battery plate
  • The monitor position can be rotate forward and backward with a red knob 
  • Includes a pair of handle with our patent push button technology SHAPE red ratchet key for fast and easy adjustment 
  • Handles are attached with SHAPE standard ARRI rosette on each side on the monitor support
  • Handles can be place up and down with our 360 degrees rotation
  • Includes a universal cheese plate with 1/4-20 and 3/8-16 threaded holes
  • The cheese plate can be move forward and backward using a red knob for easy access to the batteries rear connectors of the monitor
  • PARALINX or TERADEK wireless data receiver can be install in the cheesplate behind the monitor, using the adaptor supplied with the receiver
  • Handles can be positioned backwards for a desktop configuration; can easily hold on a flat surface
  • Can be combined with an ANTON BAUER or V-Mount battery plate
  • Can be combined with the ICON 15mm RODBLOC Spigot 750 to install on rods
  • The monitor support can be installed on a gobo stand and fixed with SHAPE red ratchet key
  • Includes the new SHAPE strap with rubber padding for good grip and the best support for your director's kit!
  • Rubber handgrips can be replaced by our WOODEN HANDLES
  • * Only compatible if the monitor has threaded holes underneath 
  • Universal bracket for monitors between 7 and 9 inches 
  • Includes removable spigot with rubber plug for use during handheld set up
  • Compatible with most monitors used by directors as ;SMALL HD, ATOMOS , TV LOGIC , iKAN, SONY, IKEGAMI, ASTRO DESIGN, LILIPUT and more.
  • CNC Aluminum & lifetime warranty

SHAPE also included in this bundle a strap made of rubber and nylon to provide you a better support and to increase the security for the monitor. SHAPE design the monitor bracket to be mounted on a gobo stand, and it can also be mounted on our  ICONBLOC 15mm Spigot 750 to be installed on rods. The rubber handgrips can be replace by our new wooden handles made of marple harwood.

What's Included

V-Mount Battery Plate
3x 1/4-20 Ratchet Key
1/4-20 Screw Allen Key
2x 1/4-20 Adjustment Key
2x 1/4-20 Attachment Screw
ICONCP33
ICONBODY
HAND1
Neck Strap

Reviews

Product Specifications

INCON2V

Assembled (Depth x Height) 2 1/2" x 8" 
Assembled Weight 2.65 lbs 

Questions & Answers

Shape WLB Wireless Director's Kit with Handle V-Mount Plate

Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.

We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.

As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.