This item is unavailble
This page is here for your reference.
Diva-Lite 30 LED DMX
Kit includes Diva-Lite 30 LED fixture, honeycomb louver & flight case (KAS-DL30)
The Diva-Lite LED fixture includes built-in DMX electronics with wireless capability, removable 90° Honeycomb Louver and center mount with baby receiver lollipop. It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.
- Kelvin presets & custom settings, 2700K-6500K
- Universal input 100VAC-240VAC or 24VDC
- Manual & DMX Dimming w/ Auto Terminate
- DMX wireless (Lumen Radio)
- Green/Magenta Control
- Flicker-free, dead quiet operation
- Built-in Barndoors
- Removable Honeycomb Louver
- Center Mount
- The Center Mount has a ball and socket design with a lock down handle. To orient the fixture, release the handle, position the fixture, then lock down the handle. A 180° turn loosens the orientation of the mount. A right turn tightens the mount.
- The tension on the lock lever may be adjusted by pulling the handle away from the mount. This disengages the handle from the screw mechanism and allows the lever to be reoriented.
- At the other end of the Center Mount is a baby receiver (16mm) that can go directly onto a light stand.
Mounted on a Stand
Example of the Diva-Lite LED rigged into a mafer clamp with baby pin. Note the eyelet next to the mount is used as a safety point.
Diva-Lite LED DMX
The Diva-Lite LED DMX includes state of the art features with dial-in variable color temperature control, full-range dimming and programmable 2700-6500K presets. It operates flicker-free and does not shift color temperature when dimmed. Light levels are consistent throughout the Kelvin range.
With built-in DMX and Lumen Radio® receivers, the Diva-Lite LED’s can be controlled by DMX and/or DMX wireless with DMX auto terminate. In addition, the Diva-Lite LED DMX features a Green/Magenta adjustment to match the spectral sensitive curves of the most popular cameras and other light sources. The energy efficient Diva-Lite LED DMX runs on universal input voltage from 100-240VAC at only 1.3A (120VAC) (Diva-Lite LED 30) or can also operate 24VDC using only 7A.
The Diva-Lite LED DMX is powered AC and includes an IEC connection. It includes universal input from 100-240VAC.
The Diva-Lite LED DMX can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin xlr. The pin polarity is:
- Pin # 1 – Ground
- Pin # 2 – +18-36VDC
- Pin # 3 – Not used
The Diva-Lite LED DMX operates on three DMX channels using DMX512. The first channel operates dimming; the 2nd channel operates Kelvin color temperature control; the 3rd channel operates the Hue. Press the rotating knob once to shift between Fine (single digits) and Coarse (in 10th’s) address selection.
The Diva-Lite LED DMX includes a built-in Lumen Radio receiver and can be operated wirelessly with a Lumen Radio transmitter (sold separately). Wireless is an option to using DMX cables.
The Diva-Lite LED DMX operates on universal AC power or battery power and needs only 1.3A at 120VAC or 7A at 24VDC
(Diva-Lite LED 30). The Diva-Lite LED’s cost savings from low energy and long LED life continues Kino Flo’s reputation as an environmentally friendly lighting company.
The Diva-Lite LED is comprised of a lightweight fixture design with built-in barndoors and a removable 90° honeycomb louver.
The center mount with baby receiver lollipop can mount directly onto a baby stand or hang from a grid with a baby pipe clamp.
The Diva-Lite LED features state of the art electronics with onboard and DMX dimming with DMX auto terminate. The five push-button Kelvin presets can be fine-tuned to custom settings from 2700K to 6500K with a turn of a dial. Light levels do not change when selecting Kelvin settings. The Diva-Lite LED also features a Green/Magenta control to match the spectral sensitive curves of the most popular cameras and other light sources on the set. With built-in DMX and Lumen Radio® receivers, the Diva-Lite LED’s can be controlled by
DMX and/or DMX wireless. With universal input at 100-240VAC, the Diva-Lite LED 30 uses only 1.3A at 120VAC or 7A at 24VDC.
The unique features and portable design make the Diva-Lite LED a versatile tool in the studio or on location.
Long LED Life
LED’s are well known as being energy efficient, lasting for thousands of hours. While Kino Flo’s Diva-Lite LED also has a long LED life, the Diva-Lite LED’s unique design will maintain its color-correct color temperature.
True Match® Color-Correct
As with all Kino Flo products, the Diva-Lite LED has been specially formulated to match the spectral distribution curves of today’s HD film and video equipment. The Diva-Lite LED has a high color rendering index of CRI 95. Even while dimming, the fixture is flicker-free and without color shift.
Heat Management Design
For Kino Flo, heat management is a critical design element of fixture design. The physical heat or buildup heat within the LED fixture will directly influence the color temperature, lumen performance and life of an LED.
The Diva-Lite LED’s unique design operates coolly, consumes very low energy (1.3A, 120VAC) and is properly ventilated to maintain a stable color temperature.
A well maintained temperature extends the lumen maintenance, color temperature and life of an LED.
Cost savings cover a broad range of concerns:
- Lower energy costs
- Less heat so lower air conditioning expenses
Energy Savings Calculations
With the push for reducing fossil fuel consumption, TV studios are looking at cooler more efficient lighting systems to reduce the costs and save energy. Part of this process involves generating energy values to determine savings. One of the most important values is Btu/kWh.
- Dial-in color temperature control
- Can use preset buttons to store custom Kelvin settings
- Light levels do not change when selecting Kelvin settings
- Colour-correct with high color rendering index (CRI 95)
- Energy efficient, draws 1.3A, 120VAC and 7A, 24VDC (Diva-Lite LED 30)
- Full range onboard and DMX dimming
- DMX Auto Terminate
- No color shift while dimming
- Mounts to stand, light enough to be hand-held
The FlozierThe Flozier is cloth material that slips over the front of the fixture and provides a large area of white diffusion. The resulting larger area of diffusion further softens the light. It is available in half density.
Honeycomb LouverThe spread of the light is controlled by means of thin wall honeycomb louvers. The advantage of these louvers is the minimal loss of light. The Diva-Lite LED fixtures include a 90° louver. A 60° louver is also available as an accessory. They are lightweight and are held to the fixture with Velcro fasteners.
Flight CaseThe KAS-DL30 is well suited for long distance transport by sea or air. The rugged construction ensures that the system is well protected. The flight case holds one Diva-Lite LED fixture, an additional louver and a medium duty stand.
Diva-Lite LED 30 Fixture (DIV-L30X)
Flight Case (KAS-DL30)
Diva-Lite LED 30 DMX
|Input Voltage||100 ~ 240VAC
|Input Voltage||18 ~ 36 VDC
|Kelvin Range||2700 ~ 6500|
|Dimming Range||100% ~ 1%|
|Dimensions||99 x 27 x 15 cm (39 x 10.5 x 6”)|
|Weight||8 kg (17 lbs)|
Questions & Answers
Kino Flo Diva-Lite LED 30 DMX Kit With Flight Case
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.