Product Highlights
  • 7.85" Touchscreen Field Monitor
  • 2048 x 1536 Resolution
  • 1000 cd/m² High Brightness
  • HDMI, MicroSD , Micro-USB & USB-C Connection
  • Android Operating System
  • ROM 64GB+RAM 4GB Memory
5.5" High Brightness
7.85" High Brightness
DJI CrystalSky Monitor (7.85 Inch) DJI CrystalSky Monitor (7.85 Inch)
Web Availability: Special Order
Vistek Locations
  • Toronto Special Order
  • Ottawa Special Order
  • Mississauga Special Order
  • Calgary Special Order
  • Edmonton Special Order
Please call and verify availability at the store as stock changes daily.


Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.


A maximum 2000 cd/m² of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen details are clear and sharp, and colors are vibrant, giving the quality needed to fine tune image composition. A dedicated Sunlight Readability Enhancement mode is especially designed for processing the image in real-time to ensure more comfortable viewing under bright light.

* 5.5”/7.85” 1000 cd/m²; 7.85” Ultra Bright 2000 cd/m²

Resolution: 2048x1536 (7.85”) / 1920x1080 (5.5”)

Smoother Video Display

The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.


A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.


A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.


Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.

The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.


The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.

When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.

Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.


Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).


The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.

What's Included

CrystalSky Monitor (7.85" High Brightness)
Intelligent Batteries ×2
Intelligent Battery Charging Hub


Product Specifications

CrystalSky Monitor 7.85"

Display Multi-touch display with IPS technology 
Resolution 2048x1536 
Brightness 1000cd/m² 
Operating System Android 
App DJI GO, DJI GO 4, DJI Pilot 
Memory ROM 64GB+RAM 4GB 
Connectors HDMI,MicroSD card slots,Micro-USB and USB-C 
Connectivity WIFI:2.4G,5.2G&5.8G
802.11b?802.11g?802.11n(HT20) 802.11a 4G dongle support
Gyroscope Support 
Compass Support 
Speaker Support 
Brightness Sensors Support 
MIC Support 
Built-In Battery 980 mAh, 3.7V 
External Battery 4920 mAh,7.6V (detachable) 
Operation Temperature -20°C to 40°C (-4°C to 104°C) 
4K Video decoding H.264 4k 30fps / H.265 4k 60fps 

Without Battery
208.6 x 147.8 x 17 mm

With Battery
208.6 x 147.8 x 34.75 mm

Outer Battery
90 x 45 x 26 mm

Questions & Answers

DJI CrystalSky Monitor (7.85 Inch)

Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.

We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.

As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.