- Toronto Special Order
- Ottawa Special Order
- Mississauga Special Order
- Calgary Special Order
- Edmonton Special Order
Made for the ARRI ALEXA MiniTransform your ALEXA Mini to a fully featured mini doc camera with on-board audio capabilities with the DXA-ALEXA. The carbon fiber chassis matches the look and feel of the camera and with a weight of under 1 lb, the slim line design will easily fit on your rig and not bog you down. Constructed of top quality components, including weather resistant top panel switches for outstanding reliability and durability.
- Phantom Power
- Headphone Support
- 2 pin Lemo Power Jack
- Transformer Balanced Inputs
- Water Resistant Switches
- Low Noise Pre-amplifier
- Stereo Mini-Jack Input
- 5-pin XLR Output
- Mounting Bracket
- Tri-Colour LED Level Indicators
- 2x XLR Inputs
Nothing Could Be Easier to Use or Provide Better Performance
The ultra low-noise preamplifiers provide exceptional performance with over 100dB in dynamic range. The two XLR inputs are transformer balanced for galvanic isolation and high common mode rejection. The DXA-ALEXA also provides all the features you need including dual gain controls, phantom power, level indicators and headphone monitoring. The tri-color LED level indicators make it a snap in setting the proper recording levels. The output is a balanced 5-pin XLR that connects directly to the 5-pin Lemo input on the camera via an optional cable. There is also an auxiliary mic level output via an unbalanced stereo mini-jack so it can be connected to a variety of other cameras and recording gear. Power is from your rig via the 2 pin Lemo connector.
Flexible Mounting Options
Fits Neatly and Easily on Your Rig
With the included bracket, you can mount the DXA-ALEXA in several ways to the camera cage. When using the ARRI ALEXA Mini camera cage, you can mount it under the handle, side bracket or anywhere with an optional V-Lock. The bracket has captive thumb screws to easily add or remove the device from the camera. The base of the unit has three threaded 1/4″/20 holes to also allow it to be mounted to the rails via a third party rail bracket. Beachtek recommends the Redrock Micro DSLR Baseplate.
5-Pin Lemo Output Cable
D-Tap to 2-Pin Lemo Power Cable
|Frequency Response||20 Hz to 20 kHz (+/- 1 dB)|
|Gain||Line Out Lo Gain: 40 dB, Hi Gain: 60 dB
Mic Out Lo Gain: 10 dB, Hi Gain: 30 dB
|Maximum Input Level||Lo Gain: -15 dBu
High Gain: -35 dBu
|Output Clipping Level||Line Output: +25 dBu
Mic Output: -5 dBu
|Dynamic Range||100 dB|
|THD + N||Lo Gain: 0.012% (+4 dBu output, 1 kHz)
Hi Gain: 0.06% (+4 dBu output, 1 kHz)
|Channel Separation||Lo Gain: 85 dB (+4 dBu output, 1 kHz)
Hi Gain: 80 dB (+4 dBu output, 1 kHz)
|Metering (Tri-Colour LED)||Green -40 dBu to 16 dBu
Yellow -16 dBu to +4 dBu
Red Over +4 dBu
|Powering||External DC Input Jack (12-16 V)
Pin 1 = (-), Pin 2 = (+)
|Dimensions||12.6 x 9.6 x 4 cm (4.9 x 3.7 x 1.5")|
|Weight||374 g (0.82 lbs)|
Questions & Answers
Beachtek DXA-ALEXA 2 Channel Studio Grade Mic Pre-amp for ARRI ALEXA
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.