- Toronto Available for Order
- Ottawa Available for Order
- Mississauga Available for Order
- Calgary Available for Order
- Edmonton Available for Order
DJI Ronin 2 ...and everything you'll need for it.
Higher Torque, More Power, Same Precision
Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.
With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.
Create Your Legacy
VERSATILEA newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams, and more.
EASYThe simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
INTELLIGENTEnhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.
INTEGRATEDPower systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.
RELIABLEEvery element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.
With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.
Whether it’s a simple DSLR or a professional camera with cinema grade glass with all the accessories mounted, Ronin 2 will stabilize the build.
Ready Rig with Pro Arm Combo
Camera stabilization meets practical weight support.
- Y axis stabilization, supports up to 30 lbs
- Extended range of motion
- Quick release connector for gimbals
- Carbon Fiber Rods
- 1000D Cordura pack exterior
- Precision engineered aerospace grade aluminium & only quality American parts
- Pass through a doorway or sit in a car with ease
- Unpack and get to work right away
- Light weight small footprint for travel
- 1 Year Manufacturer’s Warranty
- Replacement parts available
Newly designed waist support system evenly distributes the weight across your hips.
Assembles in less than 2 minutes and fits into included carry case for easy travel, the fully assembled weight is 10lb.
The entire gimbal stabilizer vest can easily fit through a standard doorway allowing the operator more freedom of movement on set and less bumping into things.
By keeping everything close to the body we were able to make a system that maps to the operators sense of space.
An ergonomic and adjustable backpack design distributes the camera weight off the arms and onto the hips, maximizing comfort and minimizing fatigue.
Ready To GoThis package contains the Ready Rig GS with the newly released ProArms preinstalled.
Extended RangeThe ProArms can be operated in the locked or unlocked position providing the operator support throughout the systems range.
Durable DesignMade to withstand the elements, these carbon fiber arms are all custom manufactured in the U.S.
Monitor MountStop remounting your monitor for every configuration and always keep it in your line of site.
Increased PayloadBuilt your camera package how you want because with the new ProArms you can carry up to 40lbs!
Ronin 2 Gimbal
Ronin 2 Power Hub (w/ Camera Control Module)
Camera Dovetail Plate
Camera Top Cross Bar
Remote Controller (w/ Neckstrap)
TB50 Battery Mount
Intelligent Battery (TB50) ×2
Battery Charger Power Cable
Quad Charging Hub
Grip (w/ Fold-away Feet and Top Mounting Block)
Accessories Package (Screws & Hex Tool)
Cables Package (Red Power Cable, Arri Alexa Mini Power Cable, CANBUS to 2-pin Power Cable, CANBUS to 5.5mm Power Cable, Triple P-tap Breakout Box, USB Type-C Data Cable, RED RCP Control Cable, Arri Alexa Mini Start/Stop Cable, SDI IN Cable, SDI OUT Cable, Remote Battery Mounting Cable, UART to D-BUS Cable, 1 each.)
Quick Start Guide
Monitor Mounting Bracket
15mm Rod Mount
15mm Rod ×2
Ronin 2 Universal Mount
Water Tight Protective Case
Ronin 2 MotionBlock
Ready Rig Frame
Shoulder mounts x2
ProArm Carbon Fiber Support Rods x2
Rear Tension Cables x2
Universal Gimbal Attachments x2
Ready Rig GS Bag
|Built-In Functions||Operation Modes
- Underslung Mode
- Upright Mode
- Briefcase Mode
- Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Built-in Touch Panel
USB Type-C Connection
Power and Video Signal through Slip Ring
MECHANICAL & ELECTRICAL
|Working Current Static current: 300 mA (@22.8 V)||Static current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
|Run Time||8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
|Operating Temperature||-4°F ~ 122°F (-20°C ~ 50°C)|
|Weight||Including handle bar: 12 lb (5.5 kg)
Excluding handle bar: 9 lb (4.2 kg)
|Gimbal Dimensions||Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
|Camera Tray Dimensions||Maximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
|Accessory Power Connections||14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)|
|GCU Input Power||Intelligent Battery: 4280 mAh-22.8 V|
|Connections||2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C|
|PC Assistant Software Requirements||Windows 7 or above; Mac OS X 10.11 or above|
|Mobile Assistant Software Requirements||iOS 9 or above; Android 4.4 or above|
|30 lbs (13.6 kg)|
|Angular Vibration Range||± 0.02°|
|Maximum Controlled Rotation Speed||Pan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
|Mechanical Endpoint Range||Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
|Controlled Rotation Range||Pan axis control: 360° continuous rotation
Tilt axis control: +45° to -135°
Roll axis control: ±45°
Questions & Answers
DJI Ronin 2 Professional Combo With Ready Rig+ Pro Arm Combo
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.