• Webcode: 421236 • Mfr: R2 BASIC
Product Highlights
  • 13.6 kg (30 lbs) Max. Payload Capacity
  • 5.5 kg (12 lbs) Weight
  • +45° to -135° Tilt Angle Range
  • ±45° Roll Angle Range
  • 360° Pan Angle Range
Web Availability: Special Order
Vistek Locations
  • Toronto Special Order
  • Ottawa Special Order
  • Mississauga Special Order
  • Calgary Special Order
  • Edmonton Special Order
Please call and verify availability at the store as stock changes daily.

Overview

Higher Torque, More Power, Same Precision

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.

Create Your Legacy

  • VERSATILE

    A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams, and more.
  • EASY

    The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
  • INTELLIGENT

    Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.
  • INTEGRATED

    Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.
  • RELIABLE

    Every element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.

Accessory Support

With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.

Supported Builds

Whether it’s a simple DSLR or a professional camera with cinema grade glass with all the accessories mounted, Ronin 2 will stabilize the build.

What's Included

DJI Ronin 2 Gimbal
Grip
Remote Controller
2 x TB50 Intelligent Batteries
Dual TB50 Battery Mount
Battery Charger
Quad Charging Hub
Battery Charger Power Cable
Ronin 2 Power Hub
Protective Case
Hex Tool
Assembly Hardware & Cables

Reviews

Product Specifications

Ronin 2

GENERAL

 
Built-In Functions Operation Modes
- Underslung Mode
- Upright Mode
- Briefcase Mode
- Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode

Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring

MECHANICAL & ELECTRICAL

 
Working Current Static current: 300 mA (@22.8 V) Static current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time 8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time) 
Operating Temperature -4°F ~ 122°F (-20°C ~ 50°C) 
Weight Including handle bar: 12 lb (5.5 kg)
Excluding handle bar: 9 lb (4.2 kg) 
Gimbal Dimensions Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
 

PERIPHERAL

 
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections 14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A) 
GCU Input Power Intelligent Battery: 4280 mAh-22.8 V 
Connections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C 
PC Assistant Software Requirements Windows 7 or above; Mac OS X 10.11 or above 
Mobile Assistant Software Requirements iOS 9 or above; Android 4.4 or above 

WORKING PERFORMANCE

 
Load Weight
(Reference Value)
30 lbs (13.6 kg) 
Angular Vibration Range ± 0.02° 
Maximum Controlled Rotation Speed Pan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s 
Mechanical Endpoint Range Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation Range Pan axis control: 360° continuous rotation
Tilt axis control: +45° to -135°
Roll axis control: ±45°

Questions & Answers

DJI Ronin 2 Basic Combo

Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.

We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.

As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.