This item is unavailble
This page is here for your reference.
The FUJIFILM X-T3 features a newly-developed back-illuminated “X-Trans CMOS 4” sensor, the fourth generation to feature in the X Series. Boasting a resolution of 26.1MP, the sensor uses a unique colour filter array, synonymous to X-Trans CMOS sensors, to control moiré and false colour without the use of an optical low-pass filter. Its back-illuminated structure enhances image quality while maintaining a high S/N ratio. Furthermore, ISO160, previously available only as extended ISO, is now part of the normal ISO range, allowing you to achieve incredibly clean, noise free images.
- X-Trans™* CMOS 4 & X-Processor 4
- Phase detection AF to entire frame
- Up to 30 fps black-out free high-speed continuous shooting
- Sports finder mode
- Monochrome Adjustment
- Colour Chrome Effect
- 4K/60P 10 bit recording
- Weather resistant structure
4K/60P 10bit HDMI output and internal SD card recording
The X-T3 is FUJIFILM's first model that features 4K/60P 4:2:2 10bit HDMI output and 4K/60P 4:2:0 10bit internal SD card recording. Supported video formats include the widely-used H.264/MPEG-4 AVC as well as H.265/HEVC for greater data compression. This enables 200Mbps bitrate recording when shooting 4K/60P 4:2:0 10bit. Video compression options available are ALL-Intra* and Long GOP. When using ALL-Intra, video is recorded at 400Mbps.
Enhanced ISO performance for a wider scope of video expressions
The introduction of a new noise reduction process and new “4K interframe NR” function have reduced noise at ISO12800 by the equivalent of approx. 2 stops. The NR process has a greater level of noise-identifying accuracy for appropriate denoising performance. The 4K interframe NR function uses differential data between adjacent frames to reduce noise even further. Furthermore, the minimum sensitivity for shooting F-Log and with the setting of DR400% footage has been extended from ISO800 to ISO640.
Further expansion of video functions with firmware update
Available at the end of 2018 via firmware update, the FUJIFILM X-T3 will support video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards. In response to user feedback, the firmware update will also allow the FUJIFILM X-T3 to simultaneously output Film Simulation and F-Log footage, further expanding its video functions.
Greater Freedom of Gradations with 10bit Colour Depth
The FUJIFILM X-T3’s 10bit colour depth has 64 times the colour information versus an 8bit depth system. With the wide dynamic range of 400% (approx. 12 stops), it enables gradation-rich video recording when applying “ETERNA”, characterized by subdued colour and rich shadow tones, or “F-Log,” which is a gamma curve option with an even wider dynamic range.
Simultaneous Output of 4K HDMI and Internal SD Card Recording
The FUJIFILM X-T3 supports 4K/60P 4:2:2 10bit HDMI output and 4K/60P 4:2:0 10bit internal SD card recording simultaneously. This allows you to take backup video or conduct 4K/60P internal SD card recording while monitoring 4K/60P footage. Also, the sensor’s read speed is about 1.5 times faster than current models, which enables fast 17msec reading of 4K/60P video. The rolling shutter distortion has been reduced for even smoother filming of fast-moving subjects.
MKX Cinema Lenses for Dramatically Improving the Quality of Video Footage
Award-winning FUJINON cinema lenses are now also available with the X Mount, offering edge-to-edge sharpness and excellent portability. Cine lenses suppress focus shift while zooming and reduce lens breathing during focusing, something photographic lenses do not. Furthermore, the MKX lenses feature three manual rings for precise adjustments of focus, zoom and aperture, allowing for comfortable functionality and operation.
Design / Operability
Large EVF Means You’ll Never Lose Sight of Your Subject
The FUJIFILM X-T3 features a 3.69-million-dot high resolution EVF with a high magnification ratio of 0.75x. The display time lag of just 0.005 seconds and refresh rate of approx. 100fps* ensure smooth display and allows you to precisely identify subject movements and focus positions.
Blackout-Free High-Speed Continuous Shooting of Up to 30 fps with AF/AE Tracking
Increased read speed from the sensor and the new high-speed processor have made it possible to have AF/AE-tracking, blackout-free continuous shooting of up to 30 fps** in approx. 16.6M (1.25x crop) mode using the electronic shutter, while maintaining a smooth Live View of 60fps to track your subject. The rolling shutter distortion, a typical issue for electronic shutters, has been halved compared to the previous generation.
Sports Finder Mode for Enhanced Shooting
The “Sports finder mode” makes it even easier to capture moving subjects. The new mode marks a cropped area in the viewfinder and shoots at approx. 16.6M (1.25x crop). This is particularly useful for sports and wildlife photography, as you can check the movements of a subject just outside the shooting frame and take advantage of shorter-than-usual blackout time as compared with the mechanical shutter.
By installing compatible software on your computer, it is possible to build an all-in-one workflow for things like “tethered shooting - checking the image - RAW development preview - RAW development”. In addition to FUJIFILM’s own software, you can use software that you are already familiar with. You can carry out tethered shooting by connecting the FUJIFILM X-T3 via USB cable or Wi-Fi connection through wireless LAN access point. Also, RAW files can be developed based on Film Simulation settings
VG-XT3 Battery GripThis grip is dust-resistant, water-resistant and capable of operating at temperatures as low as -10°C. It fits two batteries, bringing the total number of batteries to three, including the one in the camera body, to increase the maximum number of frames that can be taken per charge to approx. 1,100 (Normal mode). The camera does not need to suspend its operation when one battery runs out and another battery takes over, even if it occurs during continuous shooting or video recording, thereby offering a stress-free shooting experience.
The grip features the shutter release button, focus lever, AE-L button, AF-L button, command dials, Q button and Fn button to provide the same level of operability in vertical shooting as you get in horizontal operation. The VG-XT3 itself has battery-charging functionality. Using the AC adapter supplied (AC-9VS), you can fully charge two batteries at the same time in approx. 2 hours.
What's IncludedX-T3 Mirrorless Camera Body
NP-W126S Li-ion Battery
BC-W126S Battery Charger
EF-X8 Shoe-Mount Flash Unit
Clip Attaching Tool
Hot Shoe Cover
Vertical Grip Connector Cover
Connector Cover (Detachable)
Sync Terminal Cover
Cable Protector Owner's Manual
VG-XT3 Battery Grip
|Number of effective pixels||26.1 millions pixels|
23.5mm×15.6mm (APS-C) X-Trans CMOS 4 with primary color filter.
Sensor Cleaning system
|Storage media||SD memory card (-2GB) / SDHC memory card (-32GB) / SDXC memory card (-512GB)
UHS-I / UHS-II / Video Speed Class V90 *1
|File format||Still image
JPEG (Exif Ver.2.3)*2, RAW : 14bit RAW(RAF original format), RAW+JPEG
|Number of recorded pixels||L: (3:2) 6240 x 4160 / (16:9) 6240 x 3512 / (1:1) 4160 x 4160
M: (3:2) 4416 x 2944 / (16:9) 4416 x 2488 / (1:1) 2944 x 2944
S: (3:2) 3120 x 2080 / (16:9) 3120 x 1760 / (1:1) 2080 x 2080
|Lens mount||FUJIFILM X Mount|
|Sensitivity||Standard Output Sensitivity: AUTO1 / AUTO2 / AUTO3(up to ISO12800) / ISO160 to 12800(1/3 step)
Extended output sensitivity: ISO80 /100 /125 / 25600 / 51200
|Exposure control||TTL 256-zone metering, Multi / Spot / Average / Center Weighted|
|Exposure mode||P (Program AE) / A (Aperture Priority AE) / S (Shutter Speed Priority AE) / M (Manual Exposure)|
|Exposure compensation||-5.0EV - +5.0EV, 1/3EV step
(movie recording : -2.0EV - +2.0EV)
|Image Stabilizer||Supported with OIS type lenses|
|Shutter type||Focal Plane Shutter|
Electronic front curtain shutter
Mechanical + Electronic shutter
E-front + Mechanical shutter
E-front + Mechanical + Electronic shutter
Synchronized shutter speed for flash
Approx. 30fps [Only electronic shutter, 1.25 x Crop ] (JPEG： 60 frames Lossless compression RAW： 35 frames Uncompressed RAW： 33 frames)
* Recordable frames depends on recording media
|Auto bracketing||AE Bracketing (Frames: -2, -3, +3, +2, ±9, ±7, ±5, ±3 Step: 1/3EV, 2/3EV, 1EV, 4/3EV、5/3EV、2EV、7/3EV、8/3EV、3EV)
Film Simulation bracketing (Any 3 types of film simulation selectable)
Dynamic Range Bracketing (100%, 200%, 400%)
ISO sensitivity Bracketing (±1/3EV, ±2/3EV, ±1EV)
White Balance Bracketing (±1, ±2, ±3)
Focus Bracketing (Frames: 1-999, Step: 1-10, Interval: 0-10s)
AF frame selection
|White balance||Automatic Scene recognition / Custom1-3 / Color temperature selection (2500K~10000K) / Preset: Fine, Shade, Fluorescent light (Daylight), Fluorescent light (Warm White), Fluorescent light (Cool White), Incandescent light, Underwater|
|Self-timer||10sec. / 2sec.|
|Interval timer shooting||Yes (Setting : Interval, Number of shots, Starting time)|
|Hot shoe||Yes (Dedicated TTL Flash compatible)|
|Viewfinder||0.5 inch approx. 3.69 millions dots OLED Color Viewfinder
Coverage of viewing area vs. capturing area: approx. 100%
Eyepoint: approx. 23mm (from the eyepiece lens) Diopter adjustment: -4-+2m-1 (lockable)
Magnification: 0.75x with 50mm lens (35mm equivalent) at infinity and diopter set to -1m-1
Diagonal angle of view: approx. 38° (Horizontal angle of view: approx. 30° )
Built-in eye sensor
|LCD monitor||3.0 inch, aspect ratio 3:2, approx. 1.04 millions dots touch screen color LCD monitor(approx. 100% coverage)|
File size / Frame rate / Recording time
* For recording movies, use a SD memory card with UHS Speed Class 3 or higher.
|Film Simulation mode||16 modes (PROVIA/Standard, Velvia/Vivid, ASTIA/Soft, Classic Chrome, PRO Neg.Hi, PRO Neg.Std, Black & White, Black & White+Ye Filter, Black & White+R Filter, Black & White+G Filter, Sepia, ACROS, ACROS+Ye Filter, ACROS+R Filter, ACROS+G Filter, ETERNA/Cinema)
B & W Adjustment: -9-+9
|Grain effect||STRONG, WEAK, OFF|
|Color chrome effect||STRONG, WEAK, OFF|
|Dynamic range setting||AUTO, 100%, 200%, 400%
ISO restriction (DR100%: No limit, DR200%: ISO320 or more, DR400%: ISO640 or more)
|Advanced filter||Toy camera, Miniature, Pop color, High-key, Low-key, Dynamic tone, Soft focus, Partial color (Red / Orange / Yellow / Green / Blue / Purple)|
NP-W126S Li-ion battery (included)
Battery life for still images
Actual battery life of movie capture
Continuance battery life of movie capture
|Starting up period||Approx 0.3sec.|
|Dimensions (WxHxD)||132.5 x 92.8 x 58.8 mm (5.2 x 3.7 x 2.3")
* minimum depth 35.4mm
Approx. 539 g (19 oz.)
Approx. 489 g (17 oz.)
|Operating Temperature||-10°C - +40°C|
|Operating Humidity||10 - 80% (no condensation)|
VG-XT3 Vertical Battery Grip
|Battery Type||2 x Battery Pack (NP-W126S)|
|Tripod Mounting Thread||1/4"-20|
Questions & Answers
Fuji Fujifilm X-T3 Mirrorless Body Black & VG-XT3 Grip
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.