Director's Monitor Cage v2
The Director's Monitor Cage v2 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. Newly designed main brackets also allow direct mounting to the rear of Convergent Design Odyssey and Apollo.
The DMCv2 arrives mostly pre-assembled, with simplified, rod-based height adjustment. Ergonomic rubber hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as swing away functionality for easy access to the rear of the monitor and installed wireless devices. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting.
The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.
The tool-less design of the handles allow them to be folded in for easy packing and the sun shade can be repurposed to act as a protective cover. Also included is a padded neck strap with 4 mounting points, a Teradek mounting bracket that offers easy attachment for wireless receivers with lower #4-40 or 1/4-20 mounting points, and a cable tie for cable management.
Vertical and side-by-side mounting of two monitors is also possible with the Dual Director's Monitor Cage v2!
- Blackmagic Video Assist
- SmallHD DP4, DP6, AC7, DP7, 503, 703
- TVLogic VFM-056W/WP, VFM-058W
- Ikan D5, VK7i, VH8, VL5, VX9e
- Odyssey 7, 7Q
- Atomos Samurai, Ninja, Shogun
- And many more...
What's Included6x 1/4-20 x 1/2" button head screws
6x 1/4-20 x 3/8" button head screws
2x Offset adapters
4x M3 x 8mm philips screws (for V-Mount plate)
4x M3 x 12mm philips screws (for Gold Mount plate)
Teradek Mounting Bracket
1/4-20 x 1 1/4" button head screw and 1/4-20 nut (for Teradek Bolt)
4x #4-40 x 1/2" socket cap screws (for Teradek receiver)
4x M3 x 12mm pan head phillips screws (for Teradek XT/LT)
4x M3 x 20mm socket cap screws (for Odyssey 7Q)
WC Cable Tie
Sun Shade (velcro loop for Odyssey)
|Weight||1179.34 g (2 lbs 9.6oz)|
|Dimensions||279.4 x 177.8 x 101.6 mm (11 x 7 x 4")|
Questions & Answers
Wooden Camera Director's Monitor Cage v2
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.