Product Highlights
  • DJI Ronin-S / Zhiyun Crane 2 / Gudsen Moza Air 2 Compatibility
  • 1/4"-20 & 3/8"-16 Attachment
  • Aluminum / Wood Material Construction
  • Kit includes handgrip, AtomX Shinobi cage, adjustable monitor mount, Ronin-S mounting clamp & cold shoe
SmallRig Handgrip Kit for Ronin S/Zhiyun Crane 2 and Moza Air 2 SmallRig Handgrip Kit for Ronin S/Zhiyu...
FREE SHIPPING Available
Web Availability: Available for Order
Vistek Locations
  • Toronto Available for Order
  • Ottawa Available for Order
  • Mississauga Available for Order
  • Calgary Available for Order
  • Edmonton Available for Order
Please call and verify availability at the store as stock changes daily.

Overview

Handgrip

SmallRig Handgrip for DJI Ronin-S/Zhiyun Crane 2/Moza Air 2 BSS2340 is designed to hold your gimbal to enter a handy underslung position and provide multiple mounting points for accessories. The handle is attached to the DJI Ronin-S Mounting Clamp 2221 and Zhiyun Crane2 Mounting Clamp 2119 via the nato rail included in the package. And it can be attached to the nato rail of Moza air 2 Mounting Clamp 2328 directly. The versatile handle features a cold shoe and multiple 1/4”-20, arri 3/8”-16 threaded holes for monitor and microphone. Additionally, the wooden handgrip features a rosette allows 180° adjustment so that you can use it as a side handle and free stop in any position. The wooden handle is also compatible with the rosette extension arm such as 1870 and any other accessories features a male arri rosette.

Handgrip Features:

  • Ergonomic handle for DJI Ronin-S/Zhiyun Crane 2/Moza Air 2
  • Features nato clamp to quick release your setup
  • Allows 180° of handle adjustment via the rosette
  • Multiple 1/4”-20 and arri 3/8”locating threaded holes for accessories
  • Cold shoe on the top for microphone or monitor mount
  • The wooden handle can be used as a rosette handle (female) separately

AtomX 5" Shinobi Cage

SmallRig AtomX 5" cage for Shinobi CMA2305 was co-designed to provide an additional protective exo-skeleton for the monitor, with a wide range of industry standard mount points. The cage mounts to the monitor by two 1/4’’-20 screws on the top and bottom. Across the cage features multiple 1/4’’-20, 3/8’’-16 holes across all sides as well as to the rear side of the monitor for ultimate flexibility in mounting options. ARRI locating mount points can be found on all sides and NATO rails are also provided along on both top and bottom to allow use with a range of SmallRig mounts. The cage includes a single HDMI cable clamp that works with the range of Atomos cables and more to protect the HDMI cable and port. It features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.

Cage Features:

  • A form-fitting cage designed for Atomos Shinobi
  • NATO rails on the top and bottom
  • 1/4’’-20, 3/8’’-16 and ARRI locating holes
  • HDMI cable clamp included

Adjustable Monitor Mount

SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane 3/ Weebill Lab BSE2386 is designed to hold your monitor onto the handheld stabilizers instead of attaching a plate and then a magic arm. It connects to the side of Zhiyun Crane 3 and Weebill Lab via the integrate rosette directly.

Monitor Mount Features:

  • Designed for DJI Ronin-S/Ronin-SC/Zhiyun Crane 3/ Weebill Lab
  • Supports Monitor up to 1kg
  • Tilt 180° with Free-Stop at Any Position
  • 1/4”-20 & Cold Shoe Accessory Mount
  • Features Holes on Each Thumbscrews for Hex Spanner
  • Adjustable Degree of Tightness

For Ronin-S and Ronin-SC, please take off the original focus wheel and attach the connector rosette plate via the two M4 screws. It can support monitor up to 1kg, especially designed for 5”monitors. The monitor arm enables to tilt 180° and it can stop at any position without limitation. There are three 1/4-20 accessory holes and a cold shoe mount for microphone or light. The robust mount features rubber pad to protect your monitor from scratching. Each thumbscrew features holes for hex spanner to ensure your monitor safe.

DJI Ronin-S Mounting Clamp

SmallRig Mounting Clamp for DJI Ronin-S Gimbal 2221 is designed to provide multiple mounting options for DJI Ronin-S users. The multifunctional clamp is locked via two long M4 screws and with rubber inside to prevent scratching the gimbal. The mounting clamp features nato rail on each side allows to quick release accessories and comes with multiple 1/4“-20 and two arri 3/8”holes. Optional Magic Arm 2115 and Cold Shoe 1960 can be attached for mounting a monitor or microphone. 

Mounting Clamp Features:

  • Designed for Ronin-S Gimbal
  • Features nato rail on each side allows to quick release accessories
  • Multiple 1/4”-20 and two arri 3/8” holes for accessory attachment
  • Add rubber inside the clamp to prevent scratching the gimbal

Cold Shoe

SmallRig Cold Shoe 1960 comes with two 1/4" holes, which could attach GH5 Cage for Panasonic Lumix GH5 1965, Top Plate for Blackmagic Ursa Mini / Mini Pro 1958, Side Plate for Blackmagic Ursa Mini/Ursa Mini Pro 1854, New Double Shoe Handle(Cheese) 1625 and NATO Clamp 1885 with two 1/4" screws. Two arrowheads point to the built-in bump, and cold shoe could attach Articulating Rosette Arm(7") 1497, microphone and wireless microphone receiver etc.  Built-in bump secures accessories well. In addition, a certain space is kept in 1/4" holes between the nut and hot shoe, so that hot shoe contacts are protected.

Cold Shoe Features:

  • 2 screws to lock firmly
  • Built-in bump secures accessories well
  • Certain space between the nut and hot shoe to protect hot shoe contacts

What's Included

Handgrip
Nato Rail
2x 1/4 Screws
Hex Spanner
AtomX 5" Shinobi Cage
HDMI Clamp 1693
4x 1/4 Screws
Hex Spanner
Adjustable Monitor Mount
DJI Ronin-S Mounting Clamp
Rod Clamp 
Hex Spanner
2x M4 Screws
Cold Shoe
2x 1/4" Screws
Hex Spanner
View Kit Components
Cold Shoe
Handgrip for DJI Ronin S/Zhiyun Crane 2/Moza Air 2
Mounting Clamp for DJI Ronin S Gimbal
AtomX 5" Shinobi Cage
Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/ Zhiyun Crane 3/Weebill Lab

Reviews

Product Specifications

Handgrip

Compatibility DJI Ronin-S
Zhiyun Crane 2
Moza Air 2
Attachment 1/4"-20 & 3/8"-16
Material Construction Aluminum / Wood
Weight 345 g (12 oz)
Dimensions 27.5 x 5 x 4.1 cm (10.8 x 1.9 x 1.6")

AtomX 5" Shinobi Cage

Compatibility Atomos Shinobi
Attachment 1/4"-20 & 3/8"-16
Material Construction Aluminum
Weight 162 g (5.7 oz)

Adjustable Monitor Mount

Monitor Compatibility Any 5”monitor kit Weights less than 1kg
SmallHD Focus Series
SmallHD Focus OLED Series
SmallHD UltraBright Series
SmallHD 500 Series
Atomos Ninja Series
Blackmagic Video Assist 5”
SmallHD 700 Series
Gimbal Compatibility DJI Ronin-S
DJI Ronin-SC
Zhiyun Crane 3 LAB
Zhiyun Weebill LAB
Material Construction Aluminum
Weight 125 g (4.4 oz)
Dimensions 12.8 x 8 x 3.1 cm (5 x 3.1 x 1.2")

Mounting Clamp for DJI Ronin-S Gimbal

Compatibility Ronin-S Gimbal
Attachment 1/14"-20 & 2x 3/8"-16
Weight 131 g (4.6 oz)
Dimensions 8.8 x 7.9 x 2.1 cm (3.4 x 3.1 x 0.8")
Material Construction Aluminum

Cold Shoe

Compatibility GH5 cage, top plate, side plate, double shoe handle & clamp
Weight 21 g (0.74 oz)
Dimensions 2.8 x 2.5 x 1 cm (1.1 x 0.9 x 0.3")
Material Construction Aluminum

Questions & Answers

SmallRig Handgrip Kit for Ronin S/Zhiyun Crane 2 and Moza Air 2

Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.

We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.

As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.