• Webcode: 436347 • Mfr: Sony A7III with Tripod KIT
Product Highlights
  • A7R III / A7RII / A7 III / A7 II / A7S II Compatibility
  • 1/4"-20 & 3/8"-16 Attachment
  • Aluminum Material Construction
  • 330 g (12 oz) Weight
  • 9.6 x 12 x 7.4 cm (3.7 x 4.7 x 3") Dimensions
  • Kit includes Sony A7 half cage, NATO handle, Atomos Ninja V cage, sunhood, wooden grip, HDMI cable clamp, rail support baseplate, LWS lens support, 2x aluminum rods, battery pack, V-lock assembly kit & tilting monitor mount
SmallRig Cage Kit for Sony A7III SmallRig Cage Kit for Sony A7III
Web Availability: Available for Order
Vistek Locations
  • Toronto Available for Order
  • Ottawa Available for Order
  • Mississauga Available for Order
  • Calgary Available for Order
  • Edmonton Available for Order
Please call and verify availability at the store as stock changes daily.

Overview

QR Half Cage

SmallRig QR Cage for Sony Sony A7R III/A7 III/A7 II/A7R II/A7S II (Manfrotto 501PL Compatible) 2098 features a built-in quick release system which allows users to detach the camera in 2 seconds and shift to other shooting scenarios. Fix the Manfrotto 501PL plate to the camera and slide it into the cage.

Half Cage Features:

  • A dedicated cage for Sony A7III and A7II series cameras
  • Built-in Manfrotto 501PL system in the cage allowing quick release of camera in 2 seconds and shifting to other shooting scenarios 
  • Multiple 1/4’’-20 & 3/8’’-16 threaded holes and ARRI locating holes
  • NATO rail on the left
  • Half cage with unobstructed camera grip and buttons access

Rotating NATO Handle

SmallRig Rotating Nato Clamp Handle HTN2362 is designed to provide a comfortable handheld use and mounting threads for accessory such as monitor, microphone and light. The quick release handle is able to rotate 360 degree and secures to any cage with nato rail on the top or side. The handle features multiple 1/4"-20 and arri 3/8"-16 threaded holes for accessory attachment, such as Monitor Mount BSE2294, BSE2348 and Magic Arm 2115. Additionally, it features cold shoe mount for microphone, light or sound receiver, the cold shoe in front features anti-off button to protect your setup from slipping off. The handle integrates with wooden material to make it more comfortable to use.

Handle Features:

  • Quick Release Nato Clamp Handle
  • Allows to Rotate 360 Degree for Top Handle or Side Handle
  • Integrates with Hex Spanner
  • 1/4"-20 & 3/8”-16 & Arri 3/8 Accessory Holes
  • The Cold Shoe in front Features Anti-off Button to Prevent Unwanted Slipping

Cage for Atomos Ninja V

SmallRig Cage for Atomos Ninja V 2209 was co-designed with Atomos to provide an additional protective exo-skeleton for the monitor, with a wide range of industry standard mount points. The cage mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side.

Atomos Ninja V Cage Features:

  • A form-fitting cage designed for Atomos Ninja V
  • NATO rails on the top and bottom
  • 1/4’’-20, 3/8’’-16 and ARRI locating holes
  • A HDMI cable clamp included
  • Drive locks for Atomos Master Caddy II

Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and an ARRI locating mount point on the base. NATO rails are also provided along on both top and bottom to allow use with a range of SmallRig mounts such as SmallRig Ball Head Magic Arm 2071 or the 2072 for quick release. The cage includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SmallRig HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port. For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor. It features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.

Left Side Wooden Grip w/ NATO mount

SmallRig Left Side Wooden Grip with NATO Mount 2118 includes Left Side Wooden Grip 1891 and NATO Clamp with Arri Rosette 2046. The wooden grip is well made of a handcrafted rosewood and curved ergonomically. When it works with the NATO clamp, it could be employed onto the NATO rail of the cage. The Quick-release-featured NATO clamp with the Arri rosette allows flexible adjustment in height and angles for a better hand-held shooting experience.

Grip Features:

  • Made of rosewood, ergonomically designed; looks good and feels comfortable
  • Flexible adjustment in height and angles for better shooting
  • Quick release for time-saving set-up
  • Versatile in combination or each piece on its own

HDMI Cable Clamp for Sony a7II / a7RII / a7SII

SmallRig Sony A7II/A7RII/A7SII/ILCE-7M2/ILCE-7RM2/ILCE-7SM2 HDMI Lock is specially designed for Sony A7II half cage 1673 and Sony A7ii Cage 1660. Attached to the cage with two 1/4”-20 screws, it prevents HDMI cable from accidental dropping. Moreover, this HDMI lock is equipped with two M5 threaded holes to lock USB Cable with screws.

Sunhood for Atomos Ninja V

SmallRig Sun Hood for Atomos Ninja V 2269 is a dedicated sun hood fitted into the SmallRig Cage 2209 by 4 velcro tapes, which is easy to take on and removed. It helps to provide great viewing experience even in harsh lighting conditions

Sunhood Features:

  • A dedicated sun hood working with SmallRig Cage for Ninja V 2209
  • Enhance viewing experience in harsh lighting conditions
  • Fitted into the cage by four velcro tapes

Universal 15mm Rail Support System Baseplate

SmallRig Universal 15mm Rail Support System Baseplate 2272 is a dedicated baseplate designed for mirrorless and DSLR cameras. It is height-adjustable to ensure different cameras sit on the baseplate complying with the LWS standard. Simply unscrew the wingnut on the side, adjust the height and tighten the wingnut. On the top are Arca compatible QR plate and receiver; attach the QR plate to SmallRig cage or camera tripod socket, drop it in to the receiver and tighten the knob screw. The baseplate holds SmallRig 15mm Rods 1053, where accessories like SmallRig Lens Support 2152, SmallRig Shoulder Pad 2077, Matte Box and follow focus can be attached. Additionally, there are multiple 1/4’’-20 and 3/8’’-16 threaded holes on the bottom of the baseplate so tripod plates can be attached.

Baseplate Features:

  • Designed for mirrorless and DSLR cameras
  • Arca compatible QR plate and receiver on the top
  • 15mm rail support provided
  • Height adjustable
  • 1/4’’-20 and 3/8’’-16 threaded holes on the bottom for attaching tripod plates

15mm LWS Universal Lens Support

SmallRig 15mm LWS Universal Lens Support 2152 is designed to remove the weight stress from camera's lens mount. It is compatible with any standard 15mm rods system and allows to adjust 6mm Horizontal and 22mm Vertical. The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support. The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories. It features a hole to for a hex spanner as a second secure point.

Lens Support Features:

  • Universal 15mm LWS Rod Mount Lens Support
  • 6mm Horizontal Adjustment, 22mm Vertical Adjustment
  • One Piece Anti-off designed 1/4"-20 Threaded Support Rod
  • Includes Universal Y-Bracket 
  • Allows to Quick Attachment/Detachment without Removing Other Rod-Mount Accessories

15mm Black Aluminum Alloy Rod

Includes 2pcs of 25 cm (10") long industry standard 15mm rod. There is an inner M12 thread on each end of the rod, so that you can extend the rod with a M12 threaded rod.

Battery Back 1547

SmallRig Battery Back allows mounting of Anton Bauer QRC, Switronix, RED, Blueshape ect. It mounts to standard 15mm rods with 15mm rod clamp(60mm apart). All necessary screws and spanners are included.

V-Lock Assembly Kit

SmallRig V-Lock Assembly Kit is a quick release set based on the standard V-Lock. It comes with a Female V-Dock and a Male V-Lock. There are multiple mounting holes and grooves on the Female V-Dock, and you can attach this assembly directly to a SmallRig camera cage kit, SmallRig monitor frame, or SmallRig shoulder pad mount. In addition, you can mount this assembly kit to SmallRig 25mm rod clamp 1860 which is designed for DJI Ronin M/MX; with this setup, you can put your V-Mount batttery on top of the Ronin to power all the accessories, which minimizes camera weight on gimbal. The two integrated protruding portions prevent it from twisting when V-Mount battery attached. The V-Lock with three M3 holes can be used as a replacement of the original V-Lock comes with the V-Mount battery.

Tilting Monitor Mount w/Cold Shoe

SmallRig Tilting Monitor Mount with Cold Shoe BSE2431 is designed to hold your monitor onto the top of camera or other mounting system via cold shoe adapter. The holder enables to tilt 185° and allows to hold your monitor onto any position without using tools. You can adjust the degree of tightness via adjusting the screw on each side. The robust mount is CNC-Machined Aluminum and it can support monitor or light up to 1.2kg. The top of mount features rubber pad to protect the monitor or light from scratching. Each thumbscrew features six holes allows to use the hex spanner for tightening to ensure your monitor safe. The bottom features a 1/4”-20 threaded hole for more accessories attachment if needed.

Monitor Mount Features:

  • Supports Monitor or Light up to 1.2kg
  • Tilts 185° with Free-Stop in Any Position
  • Heights Only 39mm
  • Features Allen Wrench Holes on Thumbscrews for Tightening
  • Protective Rubber Padding on Top

What's Included

Sony A7 QR Half Cage
Hex Spanner
Rotating NATO Handle
Cage for Atomos Ninja V
HDMI Clamp 1693
2x 1/4" Screws
4x M3 Screws
3x Hex Spanners
Left Side Wooden Grip
NATO Clamp with Arri Rosette 2046
Hex Spanner
HDMI Cable Clamp
Sunhood
Universal 15mm Rail Support System Baseplate

2x Hex Spanner
15mm LWS Universal Lens Support
2x 15mm Black Aluminum Rods
Battery Back

Plate
15mm Railblock
12x M3 Screws
4x M4 Screws
4x 1/4" Screws
2x Hex Spanners
V-Lock Assembly Kit
V-Dock
3x M3 Screw
2x 1/4"-20 Screw
Hex Spanner
Tilting Monitor Mount w/Cold Shoe
Hex Spanner
Kit Components
Rotating NATO Handle
QR Half Cage for Sony A7R III/A7 II/A7R I
HDMI Lock for Sony A7II/A7RII/A7SII/ILCE-7M2/ILCE- 7RM2
2pcs 15mm Black Aluminum Alloy Rod(M12-25cm) 10inc
Sun Hood for Atomos Ninja V
Universal 15mm Rail Support System Baseplate
V-Lock Assembly Kit
15mm LWS Universal Lens Support
Left Side Wooden Grip with NATO Mount
Battery Back
Cage for Atomos Ninja V
Tiliting Monitor Mount with Cold Shoe

Reviews

Product Specifications

QR Half Cage

Compatibility Sony A7R III / A7RII / A7 III / A7 II / A7S II
Attachment 1/4"-20 & 3/8"-16
Material Construction Aluminum
Weight 330 g (12 oz)
Dimensions 9.6 x 12 x 7.4 cm (3.7 x 4.7 x 3")

Rotating NATO Handle

Compatibility Any Cage or Accessory with NATO-compatible Rail
Attachment 1/4"-20 & 3/8"-16
Rotation 360°
Material Construction Aluminum / Wood
Weight 199 g (7 oz)
Dimensions 15.6 x 7.3 x 2.7 cm (6.1 x 2.8 x 1")

Cage for Atomos Ninja V

Compatibility Atomos Ninja V
Attachment 1/4"-20 & 3/8"-16
Material Construction Aluminum
Weight 196 g (6.9 oz)
Dimensions 17.7 x 10.7 x 2.4 cm (6.9 x 4.2 x 0.9")

Left Side Wooden Grip w/ NATO Mount

Mount Arri Rosette
Material Construction Aluminum / Wood
Weight 273 g (9.6 oz)
Dimensions 9.7 x 7.6 x 10 cm (3.8 x 3 x 3.9")

HDMI Cable Clamp for Sony a7II / a7RII / a7SII

Compatibility Sony A7II half cage & Sony A7ii Cage
Attachment 2x 1/4"-20
Weight 50 g (1.7 oz)

Sunhood for Atomos Ninja V

Compatibility Atomos Ninja V
Weight 63 g (2.2 oz)
Material Construction Nylon

Universal 15mm Rail Support System Baseplate

Compatibility Sony A6000/A6300/A6400/A6500/A7/A7II/A7SII/A7RII/A9/A7III/A7RIII
Panasonic GH3/GH4/GH5/G80/GX85/G7/G85/G9
Canon 5D Mark IV/M50/M5/M3/M6/EOS R
Fujifilm X-H1/X-T1/X-T2/X-T20
Olympus E-M1 Mark II
Nikon Z6/Z7
Canon EOS R
Canon EOS RP
Attachment 1/4"-20 & 3/8"-16
Material Construction Aluminum
Weight 267 g (9.4 oz)
Dimensions 10.8 x 6.8 x 5.4 cm (4.2 x 2.6 x 2.1")

15mm LWS Universal Lens Support

Compatibility 15mm rods system
Weight 96 g (3.3 oz)
Dimensions 10.2 x 6.9 x 3.3 cm (4 x 2.7 x 1.2")
Material Construction Aluminum

15mm Black Aluminum Alloy Rod

Diameter 1.5 cm (0.5")
Length 25 cm (10")
Weight 0.2 kg (0.44 lbs)
Material Construction Aluminum

Battery Back

Mounts Anton Bauer QRC
Switronix
RED
Blueshape
Weight 225 g (7.9 oz)
Material Construction Aluminum

V-Lock Assembly Kit

Compatibility Camera cage kit / Monitor frame / Shoulder pad mount / 25mm rod clamp
Mount Female V-Dock & Male V-Lock
Attachment 1/4"-20
Weight 152 g (5.3 oz)
Dimensions 9 x 9.5 x 0.8 cm (3.5 x 3.7 x 0.3")
Material Construction Aluminum

Tilting Monitor Mount w/Cold Shoe

Compatibility Monitor / Light up to 1.2 kg (2.6 lbs)
Attachment 1/4"-20
Material Construction Aluminum / Steel
Weight 52 g (1.8 oz)
Dimensions 5 x 2.4 x 3.9 cm (1.9 x 0.9 x 1.5")

Questions & Answers

SmallRig Cage Kit for Sony A7III

Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.

We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.

As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.