- Call for Availability in Toronto
- Toronto In Stock
The Profoto Pro-7a 2400 Generator features a heavy-duty design, self seeking voltage, consistency of light output and color temperature, and compatibility with a full line of modular light shaping tools.
The Pro 7 system's accessories are also compatible with the lightweight Acute 2 and ComPact lines of electronic flash. The Pro 7A 2400 w/s power supply features turbo recycling, ultra short flash duration, and choice of asymmetrical or symmetrical power distribution with up to 3 lampheads. The 7A also features color temperature control and auto bracketing.
Asymmetrical or Symmetrical Distribution
The power level chosen can be symmetrically or asymmetrically distributed among 1, 2, or 3 flashheads.
Six f-stop range
Power output can be dialed down 6 stops from 1200 to 37.5 w/s in 1/3 and 1/6 step increments with 2 dial controls.
Turbo recycling speed of 1.5 seconds @ full 2400 w/s. Recycling @ minumum power (75w/s) is only .17 seconds.
Ultra Short Flash Duration
Flash duration is 1/1600 sec. @ full power, 1/8,000 sec. @ min. power.
Allows the power supply to be pre-adjusted for 3 power level sequences, resulting in three exposures separated by 1/3, 1/2 or 2/3 of an f/stop.
ControlFlash color temperature can be lowered up to 400°K to achieve warmer hues, in eight 50°K intervals.
Features Self Seeking Auto Multi Voltage with AC voltages between 90 and 260V, 50 to 60 Hz. Modeling light does not need to be switched.
Switchable audible signal beeps when unit is fully recycled.
Built in Photocell
A built in light sensitive slave can be switched on or off.
Keeps internal components working consistently over years of operation.
Proportional Modeling Lights
Get a good preview of the power settings. As the flash power is dialed down, the modeling light can dim simultaneously.
|Maximum Watt/Seconds||2400 w/s|
|Guide Number||f 64.3 @ 2M (ISO 100), with standard zoom reflector.|
|Recycle Time||1.5 sec @ max. power, .17 sec at minimum power|
|Flash Duration||1/1600 sec @ max. power, 1/8,000 sec at minimum power|
|Flash Variability||6 f-stops from 2400 to 75 w/s|
|Voltage Stabilization||Yes, +/- 1%|
|Distribution||Asymmetrical or Symmetrical|
|Flash Ready Indicator||Charge Ready Light, Switchable Audible Beep|
|Operating Voltage||Auto ranging 90-130V and 180-260V, 45-65HZ.
There is no need to change the modeling lamp in a Pro 7 head.
|Sync Voltage||20V, less than 0.3mA|
|Built-in Slave Cell||Yes|
|Circuit Protection||Thermostat protects against overheating, by slowing down recharging.
|Dimensions||15.5 x 6.75 x 9.5" (40 x 17 x 24cm)|
Questions & Answers
Profoto Pro-7a 2400 Generator
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.