- Webcode: 233638 • Mfr: WL93T
- FREE SHIPPING Available
Product Highlights
Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable.
Shure WL93 Microphone Fleshtone
Shure WL93 Microphone Fleshtone- Toronto Special Order
- Ottawa Special Order
- Mississauga Special Order
- Calgary Special Order
- Edmonton Special Order
Overview
Tan, with 4-foot (1.2 m) Cable
Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications. All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter.
Key Features
- Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement
- Small, inconspicuous mounting hardware
- Full, clear sound comparable to larger microphones
- Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
- Controlled low-frequency rolloff reduces low-frequency clothing and room noise
- Low distortion, wide dynamic range
- Uniform omnidirectional polar pattern
- Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband
- Wide-range phantom powering (SM93) accepts all commonly used voltages
Reviews
Product Specifications
| SPECIFICATIONS | WL93 MICROPHONE (with standard test circuit shown in User Guide Figure 3) |
SM93 MICROPHONE (with preamplifier) |
| Type | Condenser (electret bias) | Condenser (electret bias) |
| Frequency Response | 50 to 20,000 Hz | 80 to 20,000 Hz, 12 dB/octave rolloff below 100 Hz |
| Polar Pattern | Omnidirectional, uniform with frequency | Omnidirectional, uniform with frequency |
| Output Impedance | 3000 ohms | Rated at 150 ohms (90 ohms actual) Recommended minimum load impedance: 800 ohms (May be used with loads as low as 150 ohms with reduced clipping level) |
| Output Level (1 Pascal = 94 dB SPL) |
Open Circuit Voltage: -38 dBV/Pa (13 mV) | Open Circuit Voltage: -43 dBV/Pa (7.0 mV) |
| Output Clipping Level (at 1,000 Hz) |
0.25 V at 120 dB | -18 dBV (0.13 V) minimum |
| Total Harmonic Distortion | Less than 1% at 120 dB | Less than 1% at 120 dB |
| Maximum SPL | 120 dB | 120 dB |
| Dynamic Range (maximum SPL to A-weighted noise level) |
102 dB | 98 dB |
| Output Noise (equivalent SPL) | 18 dB typical, A-weighted | 22 dB typical, A-weighted 26 dB, weighted per DIN 45 405 |
| Hum Pickup (electromagnetic) | N/A | -4 dB equivalent SPL in a 1 mOe field (60 Hz) |
| Signal-to-Noise Ratio | 76 dB at 94 dB SPL (IEC 651) | 72 dB at 94 dB SPL (IEC 651) |
| Polarity | Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* | Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output cable connector |
| Recommended Operating Voltage |
2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) | 11 to 52 Vdc phantom. Protected against reverse voltage application |
| Current Drain | 40 microamps typical | 0.33 mA |
| Environmental Conditions | Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) |
Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) |
| Cable | Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) | Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type (TA4F) |
| Case | ||
| Case | Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille |
Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Preamplifier: Steel case with non-reflective black finish, black?chrome belt clip |
| Net Weight | Microphone: 16 g (0.57 oz) | Microphone: 16 g (0.57 oz) Preamplifier: 118 g (4.17 oz) |
Questions & Answers
Shure WL93 Microphone Fleshtone
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.
