- Toronto Special Order
- Ottawa Special Order
- Mississauga Special Order
- Calgary Special Order
- Edmonton Special Order
The A15TG includes a recessed On-Off switch and a three-pin XLR audio connector. A removable end cap allows easy battery installation and removal. The A15TG can also tolerate the presence of phantom power, or a short circuit in the line it is driving. Built-in short circuit protection allows normal operation to resume after a short is removed.
The A15TG can operate continuously for approximately 1000 hours on one 1.5V alkaline battery. To conserve battery power, make sure the On-Off switch is in the Off position when the A15TG is not in use.
- Produces a continuous 700 Hz mic-level signal capable of driving low-impedance, balanced lines
- 1,000 hours of battery life under continuous use
- On/Off switch
- XLR male output
|Output Frequency||700 Hz +- 20%, when terminated with 150 ohms
|Output Level||-41.5 +- 4.5 dBV (8.4 mV typical) when terminated with 150 ohms
|Total Harmonic Distortion||5% typical for any output termination greater than or equal to 150 ohms
|Output Impedance|| <15 ohms
|Battery Type|| 1.5 V alkaline
|Temperature Range||Operating: -12 to 50 degrees C (10 to 130 degrees F)
Storage: -29 to 74 degrees C (-20 to 165 degrees F)
|Case||Steel with gray enamel finish
|Dimensions||19 mm (3/4 in.) diameter; 141 mm (5 17/32 in.) long
Questions & Answers
Shure A15TG Mic Level Tone Generator
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.