Wooden Camera Box (URSA Mini, URSA Mini Pro, V-Mount)

D-Box (URSA Mini, V-Mount)

D-Box (URSA Mini, V-Mount) is a custom version of the popular D-Box that adds power distribution, standardized remote start/stop, and hot swap capability to the Blackmagic URSA Mini Pro, EF Mount, PL Mount, and B4 Mount cameras. The D-Box attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop.

Connectors on the D-Box are contoured inline with the URSA Mini body, streamlining port connections and cable management. The module also provides two 3pin Fischer ports, allowing start/stop with any ARRI standard trigger device.

The D-Box is equipped with a Mini 4pin XLR DC Input and includes a Mini 4pin XLR to Full 4pin XLR pigtail cable allowing an AC power supply or external power plate to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. The OEM AC Power Supply provided with the Ursa Mini Pro does not have a high enough amperage rating to power a D-box with accessories or perform a Hot Swap from battery power to DC input. Wooden Camera offers a higher rated unit for these requirements: 15V Power Supply (4pin XLR Female).

D-Box Connections:

• D-Tap - 12V Unregulated
• USB - 5V Regulated
• 2 pin LEMO compatible connector - 12V Unregulated - ARRI standard wiring
• 2 pin LEMO compatible connector - 12V Unregulated - ARRI standard wiring

- Regulator built in to convert battery voltage to 24V
- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers
- ARRI standard start/stop capabilities

- Regulator built in to convert battery voltage to 24V
- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers
- ARRI standard start/stop capabilities

- DC input on the D-Box is a Mini 4pin XLR but a pigtail cable is included to full-size 4pin XLR
- Priority is given to DC Input to preserve battery charge when both sources connected