This item is unavailble
This page is here for your reference.
The ECM-88B is a miniature omni-directional electret-condenser microphone ideally suited for quality-critical applications in broadcasting, theater and field production. This lavalier mic achieves high-sensitivity and has a flat-and-wide frequency response. The ECM-88B offers extremely low handling noise with unparalleled high sound quality. The ECM-88B comes with a DC-78 power supply and it has a cable length of 8.2 feet. This model is best suited for wired lav mic applications. However; with the DC-78 power supply disconnected, the ECM-88B's 4-pin (SMC9-4P) connector can also be used with Sony WRT-822B and WRT-8B wireless mic body-pack transmitters. Other ECM-88 Series models include: the ECM-88BC; supplied with a 4-pin connector (SMC9-4P) optimized for wireless mic use (cable length 3.9 feet); the ECM-88BPT pigtail version (without connector), and the ECM-88FPT beige-colored pigtail version (without conector).
- Omni-directional dual-diaphragm design with unparalleled sound quality
- Ultra-compact microphone capsule with a flat-and-wide frequency response
- Extremely low cable handling noise
- Water-resistant design
- ECM-88B Microphone
- Horizontal Holder clip
- Vertical Holder clip
- Double metal clip
- Urethane windscreen
- DC-78 power supply
- Carrying case
- Operating instructions
Capsule type: Electret condenser
Frequency response: 20 Hz ~ 20 kHz
Sensitivity: -52 dB +/- 2 dB (when used in conjunction with the DC-78), 0dB = 1 V/Pa. @ 1 kHz
Output impedance: 100-Ohms +/- 20%
Dynamic range: 99 dB or more
Signal-to-noise ratio: 68 dB or more (1 kHz, 1Pa.)
Inherent noise: 26 dB SPL or less (1kHz, 1 Pa.), 0dB SPL = 20u Pa
Wind noise: 45 dB SPL or less (when using the supplied windscreen), 0dB SPL = 20u Pa
Induction noise from external magnetic field: 5 dB SPL or less (when used with the DC-78), 0dB SPL = 20u Pa
Maximum input sound pressure level: 125 dB SPL, O dB SPL = 20u Pa
Cable length: 8.2 feet
Output connector: ECM-88B: SMC9-4P 4-pin on microphone
Supplied with DC-78 Power Supply Unit for XLR output connection
Power requirements: ECM-88B 4-pin connector: DC 1.1 to 10.0 V. ECM-88B with DC-78
Power Supply connected: Two-way powering -- battery operation (using an AA-size alkaline battery) or external DC operation (12 to 48 V)
Dimensions: 5/32" x 5/32" x 11/16"
Questions & Answers
Sony ECM-88B Lavalier Microphone Omni Directional w/DC-78
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.