- Webcode: 412198 • Mfr: LED-152X-120
- FREE SHIPPING Available
Product Highlights
- Kino Flo Compatibility
Kino Flo Select LED 150 DMX Controller, Univ 120U only includes 120 plug
Kino Flo Select LED 150 DMX Controller,...- Toronto Special Order
- Ottawa Special Order
- Mississauga Special Order
- Calgary Special Order
- Edmonton Special Order
Lease this for: $64.92 Learn More
Overview
The Select 150 LED DMX Controller includes includes state of the art features; dial-in variable color temperature control; full-range dimming; programmable presets; three menu options, one white and two color menus. The “white menu” gives the user access to Dimming, Kelvin, and Green/Magenta control channels. Kelvin range is from 2700K to 5500K.
In the first color menu, the Kelvin range travels from 2500K tungsten to 9900K daylight, and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. In addition, there is also a fifth channel called Hue Angle and sixth channel, Saturation. These two channels behave similar to a traditional color wheel, where you have white light in the center, the Hue angle determines the color along a 360-degree range, and Saturation determines how much color is applied. The second color menu provides individual red, green, blue (RGB) control. This menu is a great way to work with Apps with predetermined RGB presets or color wheels.
It operates flicker-free and does not shift color temperature when dimmed. Light levels are consistent throughout the Kelvin range. The controller can be used remotely with a 25ft extension cable or can easily be attached to the back of the Select LED fixture with Velcro.
With built-in DMX and Lumen Radio® receivers, the Select LED’s can be controlled by DMX or DMX wireless with DMX auto terminate. The energy efficient Select 150 LED DMX Controller runs on universal input voltage from 100-240VAC at only 1.3A (120VAC)
* Select 30 LED) or can also operate 24VDC using only 7A.
White Mode
- A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.
- B) Menu: Provides access to menu options such as General settings, Reset, DMX and DMX Wireless settings. Tip: While on control screen, press and hold for 3 seconds to switch to Color mode.
- C) Kelvin & G/M (Green/Magenta) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use these preset buttons to store custom Kelvin and G/M settings.
- D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
- E) Lock: Press the Lock button to disable all buttons and control knob. Press for 3 seconds to restore presets to default factory settings.
- F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Tip: Long press will bring you back one step.
- G) Data Port: Mini B USB for software updates.
- H) Dimmer Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address. Press the knob to toggle between fine and coarse adjustments or when selecting options within menus.
* DMX Note: Each Select 150 LED DMX Controller has an “AUTO TERMINATE” feature. The last fixture that does not have an XLR cable attached to the DMX “Out” port will automatically terminate.
Gels/Hue Color Mode
- In addition to White mode features, Color Mode provides access to Kino Flo presets and Gels, Hue angle and Saturation adjustments.
RGB Color Mode
- RGB color mode includes access to individual Red, Green, Blue (RGB) control. Works with Apps with predetermined RGB presets or color wheels.
Power
-
AC Input
The Select 150 LED DMX Controller is powered AC and includes an IEC connection.
The controller includes universal input from 100-240VAC.
-
DC Input
The Select 150 LED DMX Controller can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin xlr. The pin polarity is:
Pin # 1 – Ground
Pin # 2 – +18-36VDC
Pin # 3 – Not used
DMX Operation
The Select LED DMX operates on three DMX channels (in White mode) using DMX512 (six DMX channels in Color mode).
The first channel operates dimming; the 2nd channel operates Kelvin color temperature control; the 3rd channel operates the Hue.
In Gels/Hue Color mode: 4th channel operates the Gel; 5th channel operates the Hue angle and the 6th channel operates the Saturation. In RGB Color mode, 4th channel operates Red; 5th channel operates Green and the 6th channel operates Blue.
Wireless Operation
The Select 150 LED DMX Controller includes a built-in Lumen Radio receiver and can be operated wirelessly with a Lumen Radio transmitter (sold separately). Wireless is an option to using DMX cables.
Reviews
Product Specifications
LED 150x 120U | |
---|---|
Input Voltage VAC | 100~240VAC 50/60Hz, 150W |
Amperage VAC | 1.3A |
Input Voltage VDC | 18~36VDC, 150W |
Amperage @ 24VDC | 7.0A |
Kelvin Range | 2700~6500 2500~9900 |
Dimming Range | 100% ~ 1% |
Dimensions | 38 x 11.5 x 8 cm (15 x 4.5 x 3”) |
Weight | 2 kg (4.5 lbs) |
Questions & Answers
Kino Flo Select LED 150 DMX Controller, Univ 120U only includes 120 plug
Looking for a personal touch? Not sure if you are choosing the right product? Our staff is here to help.
We want to make sure you get the right product for your needs.
Our staff will help you understand the options available so you can be confident in your purchase.
As the country’s leading Professional Imaging retailer, Vistek is in the perfect position to ensure you make the right choice.
Contact us today for a personal touch.